Steel Seat Base (OE Plastic Replacement)
- Designed to be a replacement for your plastic seat base.
- Does NOT lower your seat
- Will ALSO work with your extra-wide seats
- Includes seat bases and latch housing
- Must use your current seat mount latch, spring and bolts.
- Allows you to use your 800/XP900 seats in a newer XP 1000 or S 900 and vice versa.
- Fits the following:
- RS1
- Turbo S
- XP Turbo
- XP1000(up to 2023)
- S900
- XP900
- 800
- General
- Not compatible with the RZR 570
*Due to variations in the RZR’s chassis, your seat may still wobble slightly.
2024- Up XP1000 & Xpedition
PRP’s Seat Mounts for the Polaris RZR XP 1000 and XPEDITION allow you to install our favorite PRP seats into your vehicle. So you can add more comfort and containment to your ride. These mounts are designed to adapt the stock seat slider rails to the bottom of a PRP UTV Seat, allowing you to maintain full adjustability. We also included longer slots on the mounts which allow you to adjust the seat as far back as possible. Sold as a kit to fit a pair of seats.
EMPTY HEADING
DETAILED FEATURES OF THE C89 ADAPTER:
Unmatched Durability: Made from steel that’s 3/16″ thick, it’s designed to endure rough rides without bending or breaking. This means you can enjoy your off-road adventures without worrying about the adapter.
Effortless Installation: The adapter features pre-drilled holes sized at 5/16″, making it ready to bolt on. The supplied hardware allows you to attach two of the adapter brackets to the bottom of each seat, and then to the stock seat slider.
FITMENT:
2024+ Polaris RZR XP 1000, 2024+ Polaris RZR XP4 1000 (Front & Rear), 2024+ RZR XPEDITION (Front Only)
*Does not fit 2015-2023 RZR XP 900, XP 1000, Turbo, Turbo S, RS1 (that have a plastic seat base). Does not fit RZR PRO XP, PRO R, Turbo R. These Mounts only fit 2024+ RZR’s with (that have a metal seat base/slider).
*Rear Seats will be 3″ Shorter Front to Back to allow more leg room
*Only compatible with PRP UTV Seats that have a Flat Strap Mount on the bottom of the seat frame.
KIT INCLUDES:
XP1000 Flat Strap Seat Adapter Mounts
Our Flat Strap Seat Adapter Mounts for Polaris General, RZR S900, 900 Trail, XP1000, Turbo, Turbo S, RS1 will be the mount you need to ensure proper fitment of a custom PRP seat into your UTV. This product is sold individually.
XP1000 Adapter Tubes
Use these square tube mounts to adapt your PRP Seat to your 2015+ Polaris General or RZR. The tubes to attach to the stock slider underneath the seat, and allow you adapt the Polaris Seat base to the bottom of your PRP UTV Seat. These are used for the front seats with sliders. Includes 2x Square tubes (that fit the one seat, or one side of a bench). Sold individually.
- Mount PRP seats into your Polaris General or RZR
- Works for 2015+ Polaris General, RZR S900, 900 Trail, XP1000, Turbo, Turbo S, RS1
- Includes 2x Adapter Tubes (That fit on one seat)
- Used to install PRP front seats with sliders
- Only fits PRP Seats with 1000 Style Seat frames
Pro XP, Turbo R, And Pro R Standard Mount-Front 2&4 Door
Our Polaris RZR Pro XP, Pro R, Turbo R Front Seat Mounts Kit allows you to install PRP seats into your vehicle. The mounts are designed to adapt the stock PRO XP seat slider, to the bottom of a PRP UTV Seat. These fixed adapters provide a more secure and solid base than the stock plastic release clips. These are better than our Quick Release Mounts if your are going to be racing off-road, or doing hard riding that would likely cause those plastic release clips to break. The adapter mounts re-use the stock bolts/nuts to connect to the vehicle, then we have included hardware to connect the adapter mounts to the seats. They provide a little more legroom than stock seats, and has more headroom. Be aware that these mounts are hard mounted, so they do take a little more work to access the battery or air filter. Sold as a kit to fit a pair of seats. Works with Click 6 Harnesses (with minor adjustments on 2 door passenger seat).
The 2 Door and 4 Door PRO XP’s, PRO R’s, and Turbo R’s actually have different mounting set-ups (2 Door – the passenger seat is fixed, while the driver seat can slide / 4 Door – both seats can slide). So we offer different adapter mounts depending on which vehicle you have:
- C71 – Pro XP 2 Door Front Seat Mount Kit (Pair)
- C72 – Pro XP 4 Door Front Seat Mount Kit (Pair)
FITMENT:
2020+ Polaris RZR PRO XP, PRO XP4, PRO R, PRO R4, Turbo R, Turbo R4
*Fits any PRP UTV Seats with flat strap frames (will not work with RZR 1000 seat frames).
*Mounts are included in the price when you purchase PRO XP, PRO R, Turbo R Seats on our website.
RIDE MEASUREMENTS VS STOCK SEAT
Legroom – Back of the Seat to Steering Wheel
- Stock – 19″
- C71/C72 Bolt-In Mount – 20.25″ (More Legroom than stock)
- C79 Quick Release Mount – 18.5″ (Little Less Legroom than stock)
Headroom – Bottom of Seat to Stock Cage
- Stock – 44.5″
- C71/C72 Bolt-In Mount – 45.25″ (More Headroom than stock)
- C79 Quick Release Mount – 43″ (Little Less Headroom than stock)
Pro XP, Turbo R, And Pro R Quick Release Mount-Front
Our Polaris RZR Pro XP, Pro R, Turbo R Quick Release Front Seat Mount Kit makes it easy to install PRP seats into your off-road vehicle. Designed to adapt the stock PRO XP seat slider, to the bottom of a PRP UTV Seat. Quick release adapters allow you to remove the seat without a lot of hassle for quick access to the battery or air filter. Occasionally during hard riding or off-road racing, plastic release clips at the rear of the slider can break, so we also offer a fixed seat mount option for durability. Our mounts a built to retain the ability to slide, and are quick and easy to install. The mounts provide a little less legroom and headroom versus stock seats. Sold as a kit to fit a pair of seats. Works with Click 6 Harnesses.
FITMENT:
2020+ Polaris RZR PRO XP, PRO XP4, PRO R, PRO R4, Turbo R, Turbo R4
*Fits any PRP UTV Seats with flat strap frames (will not work with RZR 1000 seat frames).
*Mounts are included in the price when you purchase PRO XP, PRO R, Turbo R Seats on our website.
Pro XP, Turbo R, And Pro R Rear Seat Mounts
Our Polaris RZR PRO XP Rear Seat & Bench Mounts Kit allows you to install PRP seats into your vehicle. The mounts are designed to adapt the bottom of a Rear PRP UTV Seat or PRO XP4 Bench Seat to the back of the PRO XP4. Rear seats/benches are 3″ shorter front to back, to allow more legroom. These mounts are compatible with the Sport, Premium, and Ultimate PRO XP Models (though you will lose the ability to fold the seats flat). Made from steel – powder coated black. Sold as a pair with hardware included.
FITMENT:
2020+ Polaris RZR PRO XP4
*Fits any Rear PRP UTV Seats with RZR 1000 frames, or any PRO XP4 Bench.